Single And Adjustable Energy Spring Hammers For Impact Testing
Technical parameters:
| Model |
SC-SH101 |
SC-SH102 |
SC-SH105 |
SC-SH106 |
| Impact energy J |
0.14,0.2,0.35,0.5,0.7,1
single energy
|
2 |
0.2,0.35,0.5,0.7,1
adjust energy
|
0.14,0.2,0.35,0.5,0.7,1
adjust energy
|
| Allowable error |
±10% |
±10% |
±10% |
±10% |
| The weight of Impact element |
250g±5g |
500g±5g |
250g±5g |
250g±5g |
| The power |
＜10N |
＜10N |
＜10N |
＜10N |
| The whole weight |
1250g±10g |
1500g±10g |
1450g±10g |
1450g±10g |
Product details:
This spring impact test conforms to the standard requirements of IEC60068-2-63,IEC60068-2-75,IEC60335 and IEC60598. As required in the standards, it is used to test the mechanical integrity of product enclosures. After applying the impact with the hammer, the product is examined with accessibility probes to determine access to shock, energy, and injury hazards.
Body: Includes release mechanism and striking element guide, mass 1250 g.
Striking element: With cocking knob and hammer head, face is polyamide, hemispherical with a radius of 10 mm, hardness of HR85-100, mass 250 g
Release Cone: mass 60 g, 10N release force
Method of application:
- According to the related standards, please fix (or place) the sample, then choose the corresponding energy needed through rotating the plate.
- Choose the impact test point. And pull the operating handle of the hammer, until the release jaws engage with and the hammer lever teeth (you will hear at this time" the click " sound ). Then the device is in a ready state.
- Make the device be vertically opposite to the impact test points on the surface of the sample and touch it, then push the device, making the impact component release, to finally strike the sample.
Notice:
A. After calibrating the device, don’t disassemble it or adjust the compression amount of the spring.
B. If the compression amount of the springs is adjusted, the device must be checked by the measurement department before being used. Otherwise, the accuracy of testing results will be directly influenced.
C. In order to prevent changes of impact energy caused by misadjustment, the products have been sealed in the factory. If you have any question, please contact our factory, who will provide you three guarantees and post-technical services.
D. Measures should be taken to prevent the rust of the hammer spring (drying moistureproof processing).
E. Requirements for environmental conditions: temperature 5~35℃, humidity 45 ~ 75%.
Product Tags:
|
|
1J Pendulum Hammer Impact Test Images
|
